Zip code location is 60803. (Five files south from Midway Airport next to Chicago, IL.)

 

DeWalt 3 HP Electronic Plunge Cut Router in a Table

W/ Manual, Part List & its Blank Owner Registration Card

 

Uses ¼” Dia & 1/2”  Dia Router Bits.

5 Different Speed Settings

 

Speed #01, = 8,000 RPM’s

Speed #02, = 12,000 RPM’s

Speed #03, = 16,000 RPM’s

Speed #04, = 18,000 RPM’s

Speed #05, = 22,000 RPM’s

 

120 V. AC

15.0 Amps

Double Insulated

Spring Loaded Twin Column

70 mm (2-3/4”) Plunging Stroke

0 – 70 mm Adjustable Routing Depth

Cutter Mounting is Precision Collet, Size ½” - 1/4”

Cutter Cap is Max of 63.5 mm (2-1/2”)

Routing is (Shallow)

Rotary Depth Stop is 3 Stage Depth Position

Stop is Position

Model is DW625

 

You may visit,

http://www.dewalt.com/us/products/tool_detail.asp?productID=112 if you would like more info on the router.

 

What can this router do?

In one of the pictures is a speed selection chart for the DW625 Router. (From the manual)

The picture demonstrates what type of speeds are compatible for what type of

material thickness.

 

I could say this whole setup is like new however, the table was built just under eleven (11) years ago and the router itself was created couple months prior and it was purchased at the same time after router table/stand was home built.

 

The table/stand was home built by my father.

 

This whole setup was used for the first eight (8) to nine (9) months until it was left to sit around in the dark. It was my father’s. This setup for these past 10 years hasn’t been operated until last week for testing/cleaning purposes for this listing.

 

The router spindle has a stable spin.

Starts up great.

Has been vacuum & clean off.

 

Features:

 

The total width of the whole setup is 50”

 

The total height of the whole setup is 40”

 

The total depth of the whole setup is 26-1/2”

 

Weight is about 95 – 100 lbs.

 

The whole setup rolls on four (4), 2” dia x 1” wide gray colored rubber wheel casters.

 

The wood under the table section is made out oak veneer.

 

The door frame in front of the cabinet is made out of oak.

 

The wood inside of the table section is made out two (2) pieces of  ¾” thick particle/flake boards glued together with a white Formica™* covering.

 

The clear section is made out plexi-glass.

 

The door hinges are made out antique brass.

 

Has two upper 5-7/8” W x 13-3/4” H doors that swing out side to side.

The compartment behind each upper door is 1.006 -/+ .05 cubic feet.

 

Has two upper 13-1/8” W x 12-3/4” H doors that swing out side to side too.

The compartment behind the both lower doors together is 3.75 -/+ .05 cubic feet.

 

Pricing?

I have found the old sale slip of the router and its prices (From Wood Worker’s Supply, Inc.)

The items and pricing are stated as this in the sales slip.

(DATED ON 08/15/1995)

 

#01. EA DW625 3 HP VS PLUNGE ROUTE $274.00 – Let it go for $137.00 (50% off)

#02. EA FINE DEPTH ADJUSTER FOR DW $24.95 – Let it go for, $12.47 (50% off)

#03. EA PARALLE FENCE W/ ADJUSTER $49.95

#04. 12X24X3/8 VIBRATION PAD $10.50

 

Selection #03, I don’t have this item in stock.

Selection #04, has nothing to do with the router. (N/A)

 

Total would be $149.47 ($137.00 + $12.47) so far.

 

For the router table, home built by my father.

Let it for, $125.53 for a starting bid total of $275.00 ($149.47 + $125.53).

 

Compare prices for router tables? – Visit at www.rockler.com

Compare prices for routers? – Visit at www.dewalt.com or check out this one in my listing,

http://www.dewalt.com/us/products/tool_detail.asp?productID=112

(After clicking on price for this router, you would be asked what or which store/website you would like to purchase / browse from.)

 

This whole setup is Local pick-up only.

 

The parts/accessories are on the left side of the table and the books/papers are on the right side of the table.

 

Also comes with its guide/fence clamp on top of the table.

Guide clamp could be moved front or back or removed off table too.

The right & left guide fences can be moved forward up to 2-7/8”.

A 1-1/4” dia. vacuum hose can be connected to the exhaust hole.

Router can be easily removed from table for separate use.

If you are the winning bidder, I’ll Email you picture map and directions on how to get to my workshop for local pickup.

 

                      Questions?, Email me through Ebay.

 

Thanks,

                Derek

* = That name belongs to its respective owner.