Bosch Model 11304 Electric Breaker Hammer.

With 1-1/8” sized, hex shape chisel with 1-1/4” flare.

                                                                                              Updated on 08-13-2007 @ 12:22 A.M. / CT

                                                                                              Item located in the 60803 Zip - Chicago Land, IL area.

MORE PICTURES OF THIS ITEM? GO TO www.thombogo.com/byellowbh.htm

Selling, “As is” – used.

Also considered as a demolition hammer.

Mostly all steel exterior yellow factory painted body expect for the black top which as made out of plastic. – Some sections of the steel body does have natural dents / scratches on it do to natural age – used for a few times. Selling house & moving – no need for it.

Great for breaking, busting up concrete and/or stone.

Why need an air compressor when this item operates on:

120 Volts AC/DC, 15 Amps, 1,800 Watts @ 60 Hz of power.

Plug it in and rock & roll at the content of your soul.

Let it work for your money.

Impact energy: 43 Ft. lbs. – this would cause a large dent and then a crack on the surface being broken with this heavy-duty breaker while at 1,340 BPM. Non-variable speed.

Perhaps she is not as new as today’s Bosch Breaker Hammer however, just as effective.

If a portable electric generator is planned to be used for this item, may the seller suggest a portable electric generator producing at the minimum of 2,500 watts or more.

Engineering number is: 0611304034

Cord Length is: 9 feet

Handle Span (Total width of breaker hammer) is: 23-1/2”

Weight (With-out hex chisel attached): 67 Pounds / Lbs.

Weight (With hex chisel attached): 72 Pounds / Lbs.

Total length of chisel is: 19-3/4” – (Made by Brunner & Lay).

This chisel works with the Bosch retaining collar lock system built-in.

This chisel has a collar too.

From to tip of the chisel to the bottom of its collar is: 13 – ¼”

Thickness of collar on the chisel is: ½”

From the top edge of the collar to the top of the chisel is: 5 –7/8”

From to the top of the breaker hammer to the bottom of the collar retainer (if the collar retainer was pulled down) is: 33 – 5/8”

If chisel was attached to the breaker hammer, to total height from the bottom of the chisel (if whole breaker hammer was resting on the chisel’s collar in the locked position) to the top edges of the left/right handles would be: 38 – ½”

Depth or thickness of breaker hammer is: 4- ¾”

Works 1-1/8” hex chisels.

Another feature about the item is that it has shock controlling handles. This means while breaking the surface with this breaker hammer, your wrists and arms wouldn’t receive that shock / rattle feeling causing some bone joint irritation to the ligaments compelling the user to feel aggravated and then tired or fatigue from working.

Need to compare prices? You may go to:

http://www.google.com/products?q=bosch+breaker+hammer+11304&hl=en&um=1&sa=X&oi=froogle&ct=title to check out.

Seller doesn’t have manual in this item however, from comparing the physical structures / equivalents of the other Bosch’s 11304’s models, 11304 Brute’s models and others from that url up above this paragraph – assuming this item would have the, “Grease-packed gearbox and hammer mechanism causing eliminating uncertainty of job site lubrication.

**PICK-UP ONLY**

This is total the buyer’s / bidder’s decision.

Who ever wins the highest bid on this item, seller will email you the map and directions to his workshop before pick-up to winning bidder. CASH – ONLY, please.

Buyer is more than welcome to test this item if needed.

Again, for more pictures / extend info, go to: www.thombogo.com/byellowbh.htm

     Questions? Email the buyer through the Ebay email system.

                       Thanks